Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Installation for Rialto Homeowners
A new Gate Installation in Rialto typically costs between $1,800 and $9,500 installed, depending on material, size, automation, and site prep. We’re Gate Repair Rialto, and gates are all we do. Led by Ruben Ochoa, our team handles everything from a simple welded steel driveway gate to a fully automated sliding system with sensors and keypads. If you’ve been putting off a sagging gate or you want real security at the curb, call (866) 569-6584 and we’ll come out, measure, and give you a written number before any work starts.
We work across Rialto, Riverside, Fontana, and the surrounding Inland Empire. Same-week scheduling is typical, and our technicians show up with a truck stocked for gate work only, not a patchwork of unrelated tools. For a sense of what installation involves, see our Gate Installation in Rialto overview.
Automatic Gate Installation
Automatic Gate Installation means pairing a physical gate with a motor, control board, sensors, and access devices so it opens and closes on command. You need it when you want security without getting out of the car every time, or when a manual gate becomes a daily hassle. Gate Repair Rialto installs complete automatic systems starting around $3,200 and running up to $12,000 for long commercial-grade runs with phone-based access control. We quote the full price before any work begins.
Operator and Motor Selection
The motor has to match the gate’s weight, swing or slide pattern, and daily cycle count. We size operators from Viking, Ghost Controls, DoorKing, and Elite to the actual gate, not the other way around.
Safety Sensor Integration
Automatic gates need photo eyes, edge sensors, and force settings tuned correctly. A gate that reverses too late or not at all is a liability, and we calibrate every system before we leave.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Installation Services
Gate Installation pricing covers the full job: removing an old gate, prepping posts and footings, hanging the new gate, and dialing in hardware and automation. You need this when a gate is rusted through, cracked at the welds, or simply too small for the vehicles you actually drive. Our installation services in Rialto start around $1,800 for a basic single-swing steel gate and run up from there based on automation, size, and finish.
Full Removal and Disposal
We haul away the old gate and hardware. You don’t get left with a pile of scrap steel in the driveway or a second bill from a junk service.
Post Setting and Concrete Work
A gate is only as straight as its posts. We dig, set, and pour footings sized for the gate’s weight and the soil conditions common in Rialto’s older neighborhoods.
Electric Gate Installation
Electric Gate Installation is the electrical side of your gate: running power, mounting the motor, wiring the control board, and programming remotes, keypads, and intercoms. You need it when a manual gate isn’t enough and you want real access control at the property line. Most Gate Installation – Fontana area properties run $2,800 to $8,000 depending on the power run distance, operator type, and access devices.
Power Run and Conduit
We trench and run conduit to the gate location, sized for the operator’s voltage and future access upgrades. No extension cords, no surface wiring that fails in a year.
Control Board Programming
Ruben Ochoa and the team program the board for remote codes, auto-close timing, and sensor logic on-site. You get a system that behaves the way you want it to from day one.
Driveway Gate Installation
Driveway Gate Installation puts a gate at the curb or property line to control vehicle access to your home. You need it when street parking is tight, when you want to keep solicitors and strangers off the driveway, or when you have kids and dogs near the road. A standard Gate Installation – San Bernardino area driveway gate runs $2,200 to $7,500 installed, with automation adding to that depending on the operator we select together.
Material and Style Choices
Steel, aluminum, and ornamental iron each behave differently in Rialto’s sun and occasional wind. We’ll show you what holds up best for your exposure and how much maintenance each finish wants.
Width and Vehicle Clearance
We measure your actual vehicles and the driveway’s turning radius. A gate that looks right but blocks your truck’s mirror is a mistake we see too often from fence shops that don’t do gates daily.
Sliding Gate Installation
Sliding Gate Installation mounts a gate on a track or cantilever system so it slides horizontally instead of swinging. You need it when your driveway slopes upward from the street, when you have limited setback, or when a swing gate would block the sidewalk or your own garage. Sliding gate installs in Rialto typically run $3,500 to $10,000 because they require a steel track, rollers, and often a longer operator run.
Track vs. Cantilever
A track system works on flat, well-drained ground; a cantilever system floats over the opening and handles gravel or sloped approaches better. We assess your driveway before recommending either.
Roller and Bearing Hardware
The rollers carry the gate’s entire weight every time it cycles. We install sealed bearing assemblies sized for the gate, not the cheap nylon wheels that flatten and bind.
Gate Opener Installation
Gate Opener Installation is the motor, arm, and control package that automates an existing or new gate. You need it when you already have a solid gate but want push-button access, or when an old opener has died and you’re tired of manual heaving. Opener-only installations in Rialto run $1,200 to $3,800 depending on brand, swing versus slide type, and whether we’re adding wireless keypads or phone control.
Retrofit on an Existing Gate
We can automate most sturdy manual gates. The gate has to be square, properly hung, and heavy enough to hold an operator’s mount without flexing.
Brand-Specific Programming
We carry and install Viking, Ghost Controls, DoorKing, and Elite openers, and we program each one to its manufacturer’s spec instead of forcing a universal workaround.
Gate Fabrication
Gate Fabrication is building a gate from raw stock to your dimensions and spec, rather than shipping in a pre-made panel. You need it when your opening is non-standard, when you want a specific design, or when you want a heavier gauge than the box-store panels offer. Custom fabricated gates in Rialto start around $2,500 for a simple steel frame gate and rise with decorative elements, size, and finish work like powder coating.
Custom Dimensions and Design
We build to the inch. Wide driveways, angled property lines, and matching an existing fence style are all things a prefab gate simply can’t do.
Steel Gauge and Longevity
We spec frame and picket thickness for how the gate will be used. A driveway gate that cycles thirty times a day needs heavier tube than a pedestrian gate that opens twice a week.
Brands We Service
We work regularly with DoorKing operators, one of the most common brands on Rialto commercial and multi-unit properties. Their slide and swing operators are workhorses, and we stock the common boards, loops, and remotes to keep them running. Viking equipment shows up on a lot of residential and light commercial installs, and we’re familiar with their swing arms and control logic. Ghost Controls is a strong choice for long residential driveways, especially where solar power makes sense, and we install and service their kits correctly. Elite operators are built for heavy cycle counts, and we handle their slide and swing models on the commercial side.
Whatever brand is on your property, whether it’s one of those four or something else entirely, we’ll diagnose it honestly. Your gate brand, our expertise.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- The gate won’t close all the way. A gate that stops three inches short of the post isn’t just annoying, it’s unsecured. The limit switch or sensor alignment is off, and forcing it can burn out a motor.
- You hear grinding when the gate moves. That’s metal on metal where there should be a bearing or bushing. Every cycle is adding wear that turns a $200 hardware job into a $1,500 track replacement.
- The gate sags and drags on the ground. Hinges or post footings are failing. Waiting means the gate tears itself off the post and takes part of the fence with it.
- The opener runs but the gate doesn’t move. A sheared pin, a stripped gear, or a broken chain. The motor may still be fine, but running it against a failed drive train will kill it.
- You feel a shock when you touch the gate. This is a ground fault and a genuine safety hazard, especially around kids. Kill the breaker and call us. A live gate is not something to troubleshoot by hand.
Our Process, Step by Step
- 1
Site walk and measure. We come to your Rialto property, measure the opening, check the ground slope, look at power access, and ask how you’ll actually use the gate. That’s cars, trucks, deliveries, pedestrians, everything.
- 2
Written quote. You get a line-item price for the gate, hardware, operator, power run, and labor. The number is agreed before work starts, and it doesn’t change unless you change the scope.
- 3
Prep and fabrication. We remove the old gate if needed, set posts in concrete, and build or order your gate. Custom fabrication happens in our shop, not in your driveway.
- 4
Installation and wiring. We hang the gate, mount the operator, run conduit, and make all connections. Everything is torqued, leveled, and tested under load.
- 5
Programming and walkthrough. We program remotes, keypads, and any phone or intercom access, then walk you through operation and maintenance. You don’t get a gate and a mystery.
How Much Does Gate Installation Cost in Rialto?
A basic single-swing steel driveway gate in Rialto typically runs $1,800 to $3,500. Add an automatic opener and that same gate lands between $3,200 and $6,000. Sliding gates and custom fabrication push the range to $5,000 to $12,000 depending on length, steel gauge, and access control features. These are installed prices, not just materials.
What moves the number: the gate’s width and weight, whether the ground is flat or sloped, how far the power has to travel from the panel to the gate post, the brand of operator, and whether we’re adding keypads, intercoms, or vehicle sensors. What doesn’t move the number mid-job: our quote. We price it, we agree on it, and we build to it.
To avoid overpaying, get a quote that separates the gate from the automation. Some companies bundle them and you end up paying for a motor package you didn’t actually choose. Our free estimate spells out every line. Call (866) 569-6584 and we’ll come measure.
Our Service Area Near Rialto
We install gates throughout the Inland Empire. Most Rialto jobs are scheduled within the week, and we’re regularly in Riverside, Fontana, San Bernardino, Moreno Valley, Rancho Cucamonga, Jurupa Valley, Colton, Redlands, Highland, and Eastvale. Response time for estimates is typically one to two business days. If you’re closer to the foothills or out by the 210 for a new gate install, just call and we’ll slot you in on the next run through your area. You can always start with our home page to see the full scope of what we handle.
Serving Rialto, CA – Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Installation in Rialto
Gate installation is the complete process of putting a new gate on your property: removing the old one, setting posts in concrete, hanging the gate, and wiring automation if you want it. It can be a simple manual swing gate or a full electric sliding system with keypads and sensors. In Rialto, most installations take one to three days from first cut to final walkthrough. Call (866) 569-6584 to talk through what your property needs.
Most standard driveway gate installations in Rialto take one to two days on-site. Custom fabrication adds lead time, usually one to two weeks for the gate to be built before installation day. Electric and automatic systems may need a third day for programming and access control setup. We give you a schedule with the written quote, and we stick to it.
Expect $1,800 to $3,500 for a basic manual steel gate, $3,200 to $6,000 for an automated swing gate, and $5,000 to $12,000 for sliding or custom fabricated systems. The price depends on gate size, material, operator brand, and power run distance. Every quote is free and line-itemed before any work begins. Call (866) 569-6584 for an exact price on your opening.
We work on DoorKing, Viking, Ghost Controls, Elite, and most other operator brands installed across the Inland Empire. Our technicians are trained on the programming and hardware specifics of each brand rather than applying a generic fix. If you tell us the brand and model, we’ll tell you whether we stock the parts or can get them same-week. Your gate brand, our expertise.
If your gate has failed and left the property open, call (866) 569-6584 and we’ll prioritize the call. We can often get a technician out the same day to at least secure the opening, even if the full replacement takes a scheduled day to complete. In Rialto, we keep our schedule flexible for exactly this kind of situation.
New gates and operators carry manufacturer warranties on parts, and our workmanship is backed so that anything we installed incorrectly gets corrected at no charge. The exact terms depend on the gate and operator you select, and we’ll spell them out in your written quote. No vague promises; just what’s on paper.
Clear the area around the gate opening so we have room to work, and make sure the driveway is accessible in the morning. If you have pets, keep them inside while we’re moving steel and running conduit. We handle permits if your Rialto property requires them, and we’ll let you know before we start. That’s it: access and a clear opening.
Schedule Your Gate Installation Service in Rialto Today
You’ve measured the opening, you know what kind of gate you want, and you want a real price. Call (866) 569-6584 and tell us what you’re working with. We’ll come out, measure everything, and hand you a written estimate with the full scope and price. No pressure, no vague ballparks, just a number you can plan around.
Written by Ruben Ochoa, Owner at Gate Repair Rialto, serving Rialto gate installation needs.