Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Rialto?
Gate installation in Rialto typically runs $1,200 to $3,800 for a single-swing residential gate, and $3,500 to $8,500 for a double-driveway gate with an automatic operator. A basic manual pedestrian gate with posts and hardware lands closer to $900 to $1,800. The spread comes down to gate material, width, and whether you’re adding an electric operator, keypad, and safety sensors.
We install gates in Rialto every week through our Gate Installation services, and the honest answer most homeowners want before anything else is a number. So here’s the number. Below you’ll find a line-item breakdown for the 2026 Rialto market, the factors that push a job toward the high end, and practical ways to keep the total down without cutting corners on the parts that matter.
For the full picture of what we install and how we approach it, see our Gate Installation in Rialto page. Otherwise, keep reading for the pricing detail.
Key Takeaways
- Manual single-swing gate installation: $1,200 to $3,800 installed.
- Double-driveway automatic gate: $3,500 to $8,500 depending on material and operator brand.
- Electric operators add $900 to $2,400 on their own, plus safety sensors and wiring.
- Rialto’s summer heat and inland wind exposure affect gate hardware and operator selection.
- Free estimates: call (866) 569-6584.
Gate Installation Cost Breakdown (2026)
The table below breaks out typical installed pricing for Rialto. Every line assumes we’re supplying and installing the component, not just the part. Labor, concrete, and haul-away are included.
| Line Item | Typical Installed Range (Rialto, 2026) |
|---|---|
| Manual single-swing gate (ornamental steel or aluminum, up to 5 ft wide) | $1,200 – $3,800 |
| Manual double-driveway gate (steel or aluminum, 12 – 16 ft) | $2,600 – $5,900 |
| Chain-link or basic utility gate | $900 – $2,100 |
| Wood or composite driveway gate | $2,200 – $6,400 |
| Automatic swing operator (single gate) | $1,400 – $2,900 |
| Automatic sliding operator (single gate) | $1,800 – $3,600 |
| Safety sensors and photo-eye pair | $220 – $480 |
| Keypad or wireless entry control | $180 – $420 |
| Concrete footings and post-setting | $350 – $900 |
| Electrical run to gate (per linear foot) | $18 – $42 |
What drives a job toward the top of the range? Three things move the number fastest: gate material and width, whether you’re adding an electric operator, and how far the gate sits from your power source. A 16-foot steel driveway gate with a sliding operator, sensors, and 60 feet of trenching to the panel will land north of $8,000 in Rialto. A 4-foot pedestrian gate with a simple latch anchored in an existing block wall comes in under $1,500.
We handle both the mechanical and electrical sides of the job, so there’s no handoff between the gate installer and the electrician. From the motor to the hinge, one crew. That matters for pricing because it eliminates the second trip, the second estimate, and the coordination fee you’d pay a generalist who has to bring someone else in.
What Affects Gate Installation Pricing in Rialto
- Gate material and finish. Ornamental steel and wrought iron cost more than aluminum, but hold up better against the wind exposure we get along the foothills east of Rialto. Aluminum costs less and won’t rust, which is a real consideration if you’re near a sprinkler or irrigation line.
- Gate width and weight. A 12-foot span needs heavier posts, deeper footings, and a more powerful operator than a 5-foot pedestrian gate. Weight is the single biggest factor in operator choice. Undersized operators on a heavy gate is the #1 cause of premature motor failure we see in Rialto.
- Operator brand and features. A LiftMaster or DoorKing swing operator costs more up front than a Mighty Mule, but the parts are stocked locally and the boards are serviceable. We’re certified to service nine major brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – so we’re not locked into one system when we spec your operator. Your gate brand, our expertise.
- Property access and trenching. Rialto lots vary widely. A gate 60 feet from the panel needs a longer power run, which adds cost. If the run crosses concrete, the price climbs. We quote trenching by the foot and tell you upfront before we start.
- Block wall condition. Many Rialto properties have existing block walls. If your gate posts need to anchor into that wall, the wall has to be sound. Cracks, settlement, or a wall that was never designed to carry a gate adds repair work before the gate goes up.
- Soil and grade. Parts of Rialto sit on soils that shift with our dry-wet cycles. Footing depth matters more here than in coastal markets. We set footings to spec for the gate weight and soil condition, not one-size-fits-all.
If your current gate just needs repair rather than replacement, the math is different. A hinge replacement, re-weld, or operator fix runs a fraction of a new install. We run both, so we’ll tell you straight whether repair or replacement is the smarter call for your gate. Call (866) 569-6584 and we’ll talk through it.
How to Save on Gate Installation
You don’t have to pay the top of the range to get a gate that lasts. Here’s what actually moves the number down without cutting into the parts that fail.
- Choose the right material for Rialto, not the most expensive one. Aluminum holds up well here and costs less than wrought iron. It doesn’t need repainting every few years. For most residential driveways in Rialto, aluminum is the practical choice.
- Skip the operator if you don’t need it yet. A manual gate now with a pre-wired operator loop means you can add automation later without re-trenching. We install the conduit while the trench is open, which is far cheaper than doing it in two phases.
- Standard sizes cost less. Custom-width gates add fabrication time and cost. If your opening allows a standard span, you’ll save.
- Bundle the sensor and keypad into the install. Adding safety sensors and entry control during the original install costs less than retrofitting. Sensors aren’t optional on an automatic gate – they’re a safety requirement – so plan for them in the budget from the start.
- Get the estimate before you buy the gate. Buying a gate online and then calling for install is a common mistake we see. The gate arrives without the right posts, the operator is undersized, or the hinges don’t match the frame. We spec the whole system together so the parts work. Free estimates are available – call (866) 569-6584.
One caution on saving money: don’t skimp on the operator or the safety sensors. On an automatic gate, those are the components that protect people and animals. A cheaper operator on a heavy gate costs you more in motor replacements over five years than the price difference on day one. That’s the pattern we see again and again with generic parts forced onto systems that were never designed for them.
Why Brand Matters on a New Gate Install in Rialto
When we spec an operator, we’re thinking about what’s already on your street and what parts we can get locally. Rialto homeowners have a mix of systems: LiftMaster swing operators on newer builds, older FAAC and BFT units that have been running for a decade, and Linear and Viking units on commercial properties. DoorKing is common on gated communities and apartment complexes.
We’re certified on all nine brands, which means we don’t steer you toward whatever happens to be on the truck. We match the operator to your gate weight, your duty cycle, and your access needs. A sliding gate on a slope needs a different operator than a flat driveway swing gate. A commercial property with high traffic needs a heavier-duty unit than a residential driveway.
That brand-specific knowledge extends to parts, too. We carry or can source the right parts for each system, which is why we don’t force generic fixes that shorten equipment lifespan. If you’re replacing a failed operator, we’ll tell you whether it’s worth repairing the existing board or replacing the unit. Sometimes a $340 control board fix saves you $2,200 on a new operator. Sometimes it doesn’t. We’ll give you the straight answer either way.
Is It Cheaper to Repair or Replace a Gate in Rialto?
Repair is usually cheaper when a single component fails – a hinge, a weld, a control board, a sensor. A hinge replacement runs $120 to $280. A re-weld on a steel gate runs $180 to $420. A control board replacement runs $280 to $620. Those are repairs worth doing on a gate that’s otherwise sound.
Replacement makes more sense when the frame is bent, the posts are failing, or the gate has rusted through at the joints. At that point you’re paying for repairs on top of repairs, and a new gate is the smarter money. We’ve replaced gates that had been patched five times. The sixth patch cost more than a new install would have.
Not sure which side of the line your gate is on? Call (866) 569-6584 and we’ll take a look. We’d rather tell you to repair a $300 hinge than sell you a gate you don’t need.
FAQs – Gate Installation Cost in Rialto
How much does gate installation cost in Rialto?
A basic manual pedestrian gate installed in Rialto runs $900 to $1,800. A single-swing driveway gate with an automatic operator runs $2,600 to $6,700, and a double-driveway automatic gate runs $3,500 to $8,500. Exact pricing depends on material, width, and operator brand. Call (866) 569-6584 for a free estimate.
How much does an automatic gate operator add to the cost?
An automatic swing operator adds $1,400 to $2,900 installed, and a sliding operator adds $1,800 to $3,600. That’s before safety sensors, which add another $220 to $480 and aren’t optional on an automatic gate. Call (866) 569-6584 and we’ll spec the right operator for your gate weight.
Do I need a permit to install a gate in Rialto?
It depends on the gate and whether it’s in a setback or near a property line. Fences and gates in Rialto fall under city code for height and placement, and automatic gates with electrical components may require permitting depending on the scope. We’ll tell you what we’ve seen on similar Rialto installs when we give the estimate. Call (866) 569-6584.
How long does gate installation take in Rialto?
A manual gate install takes one day in most cases. An automatic gate with electrical work runs two to three days, longer if trenching across concrete is involved. Concrete footings need curing time before the gate is hung, which is the part that surprises people. We’ll give you a realistic timeline with the estimate – call (866) 569-6584.
Can you install a gate on an existing block wall?
Usually yes, if the wall is structurally sound and designed to carry a gate. Many Rialto properties have block walls that work fine. If the wall has cracks, settlement, or was never meant to hold gate weight, we’ll flag it before install. Call (866) 569-6584 and we’ll look at your wall.
What to Expect When You Call
When you call (866) 569-6584, we’ll ask about your gate opening, the material you want, whether you’re adding an operator, and where the power source is. That’s enough to give you a real range over the phone, and we’ll follow up with an on-site estimate at no cost. We come out, look at the posts and the block wall, check the trenching path, and put a written number in front of you.
The reason we can give a useful estimate quickly is single-trade focus. Every tool and part in our shop is for gates. We’re not a general contractor who does gates on the side, and we’re not a fence company that sends a welder to figure out a control board. Gates are all we do. That shows up in the diagnosis and in the install.
Electric gate installation needs someone who knows the technology. If your existing gate is electric and it won’t open, close, or respond, we service those too. Same number, same crew. Call (866) 569-6584 to schedule a free estimate.
Pricing reflects the Rialto market as of 2026. Gate Repair Rialto offers free estimates – call (866) 569-6584.
What Our Customers Say
"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Yolanda Rodriguez"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Heather Bennett"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Mark Ziegler