Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Rialto, CA
Gate installation in Rialto means working with wide corner-lot driveways, decades-old block walls, and hardware that has endured triple-digit summers and relentless west wind. We’re a gate-only shop, so when you call (866) 569-6584 you get a technician whose entire focus is gates, not someone who splits time between fences, garage doors, and whatever else came in that week. Most of the homes here were built between the 1950s and 1980s, which means the original gate posts, hinges, and track systems are either sagging, seized, or simply undersized for how families use driveways today.
Why Rialto Homes Are Different
Rialto sits under two major flight corridors, San Bernardino International and the Ontario/LA-area approach paths, and the prevailing west winds push fine grit and dust across the city constantly. That grit works its way into gate tracks, roller bearings, and hinge pins. A gate that would run smooth for years in a coastal neighborhood will grind and bind here within months if the hardware isn’t dust-tolerant and properly sealed. We see it on nearly every service call: the track is packed with a paste of fine dust and old grease, and the rollers are fighting it.
The other factor is the housing stock itself. Rialto is dominated by 1950s through 1980s single-story ranch and tract homes on large lots, many on corners or cul-de-sacs. Those corner lots often have wide driveway gates oriented straight into the afternoon sun. The hinge side facing west takes the worst of the heat and wind, so it rusts and sags first. Before we ever touch an opener on a Rialto gate, we check the square on that sunny side, because if the gate leaf has dropped half an inch, no amount of motor adjustment will fix the bind at the latch post.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Rialto Services
Most Rialto calls come in for two things: a gate that physically won’t swing or slide properly, and an electric gate that stopped responding to the remote, keypad, or sensor. Here’s what each one involves here.
Gate Repair in Rialto
Physical gate repair in Rialto usually comes down to sagging hinge posts, bent or seized rollers, broken welds, and track that’s packed with windblown dust. On the older ranch homes along the established grid, we regularly find hinge barrels worn oval and gate leaves that have pulled away from the post. We re-align, weld or replace components, clear and relubricate tracks with dust-resistant grease, and set the gate square before adjusting the latch. Full details on what we repair and how we diagnose are on our Gate Repair in Rialto page.
Electric Gate Repair in Rialto
Electric gates in Rialto face two local enemies: heat that cooks control boards inside metal enclosures, and dust that fouls photo-eye lenses and limit switches. We troubleshoot the entire system from the board to the motor to the safety sensors, and because we service LiftMaster, FAAC, BFT, and Linear equipment, we diagnose correctly the first time instead of guessing. If your opener hums but won’t move, or the remote only works from ten feet away, start with our Electric Gate Repair in Rialto page for symptom-by-symptom breakdowns.
Gate Installation in Rialto
Gate installation in Rialto means engineering for dust, wind, and sun from the first bolt, not hanging a gate and hoping for the best. On corner lots with wide driveways and block-wall perimeters, the gate has to hold square through dry Santa Ana gusts and stay smooth after months of airborne grit from the surrounding desert and airport corridors. Whether you’re replacing a gate on a 1960s ranch or adding a new automatic gate to a cul-de-sac property, we build the hinge side to take the load and spec rollers and track that handle Rialto’s conditions. See our full Gate Installation page for what a complete install day looks like.
Driveway Gate Installation
Signs you need it
If your existing driveway gate sags enough to drag on the concrete, the post has cracked at the base, or you’re replacing a chain-link gap with a solid metal gate, it’s time for a proper driveway gate install.
What it costs in Rialto
Driveway gate installation in Rialto typically runs from $1,700 to $6,900 depending on width, material, and whether it’s single or double leaf.
How we do it
We set posts in concrete below the frost line, hang the gate leaf or leaves with adjustable hinge brackets, weld or bolt the frame, then align, test, and adjust the latch and stop.
Automatic Gate Installation
Signs you need it
If you’re swinging a heavy gate by hand every day, or you want remote, keypad, or intercom access without getting out of the car, an automatic gate is the upgrade that fits Rialto’s wide driveways.
What it costs in Rialto
Automatic gate installation in Rialto typically lands between $2,800 and $9,000 for a complete system with opener, safety sensors, and controls.
How we do it
We mount the operator to the gate and post, run the power and low-voltage control wiring, install photo-eye sensors and edge protection, then program remotes, keypads, and loop detectors if needed.
Sliding Gate Installation
Signs you need it
When the driveway rises sharply from the street or the yard leaves no swing clearance, a sliding gate is the only setup that works without binding.
What it costs in Rialto
Sliding gate installation in Rialto generally runs $2,500 to $8,400, with heavier commercial steel frames on the upper end.
How we do it
We lay a steel V-track or cantilever rail system, install the roller trucks and guide rollers, hang the sliding leaf, then connect the motor and safety edges before final alignment.
What Gate Installation Costs in Rialto
| Item | Typical range in Rialto |
|---|---|
| Driveway gate installation | $1,700 – $6,900 |
| Automatic gate installation | $2,800 – $9,000 |
| Sliding gate installation | $2,500 – $8,400 |
Do you handle the power run and safety edges for automatic gates?
Yes. We run the electrical from the panel to the operator, install low-voltage wiring for keypads and intercom, mount photo-eye sensors, and add safety edges so the gate reverses if it meets resistance.
How long does a gate installation take in Rialto?
Most Rialto driveway and automatic gate installs are completed in one to two days. Custom steel gates, long sliding runs, or work that requires concrete curing can add a day or two, and we set that schedule before the first hole is dug.
Brands We Service in Rialto
Your gate brand, our expertise. We carry parts and troubleshoot daily for LiftMaster, FAAC, BFT, and Linear operators, which covers most of the automatic gates installed across Rialto’s ranch and tract homes. That means no generic fixes and no waiting a week for a board we should’ve had on the truck. See our brands for the full list of what we service.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Rialto, CA
| Service | Typical range in Rialto |
|---|---|
| Gate repair (hinge, roller, track) | $180 – $420 |
| Welded gate frame repair | $250 – $700 |
| Electric gate troubleshooting | $150 – $450 |
| Circuit board replacement | $400 – $1,200 |
| Motor replacement | $600 – $1,500 |
| Driveway gate installation | $1,700 – $6,900 |
| Automatic gate installation | $2,800 – $9,000 |
| Sliding gate installation | $2,500 – $8,400 |
What pushes a Rialto gate repair or install toward the upper end is usually dust damage that was left too long, so a track that needed cleaning became a track that needed replacement, or a sagging hinge that wore the post. Whatever the job, you get a firm price before any work starts, and the price we quote is the price you pay.
Neighborhoods We Serve in Rialto
We work across Rialto’s established neighborhoods, from the older grid near downtown to the tract-home streets that spread north and east. Our gate technicians are typically able to reach most Rialto addresses the same day for repairs, and we schedule installations around your week:
- North Rialto
- Las Colinas
- Rancho West
- Downtown Rialto
- Terrace View
Service Area – Cities Near Rialto
We also run gate repair, electric gate troubleshooting, and new installs for neighbors in Fontana, CA, San Bernardino, CA, Colton, CA, and Highland, CA. Same gate-only focus, same upfront pricing.
Serving Rialto, CA – Our Local Coverage Area
We’re based in the Rialto area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Rialto
We can typically reach most Rialto addresses the same day for gate repairs, especially when a gate is stuck open and the property is unprotected. Electric gate calls may be diagnosed the same day with parts often sourced locally for the major brands we carry.
Most residential gate repairs and like-for-like replacements do not need a permit, but adding a new automatic gate or running new electrical can require one depending on the scope. We’ll tell you what actually applies during the estimate, not after the work is underway.
Yes. Rialto HOAs often have specific rules about gate height, material, and color, especially on corner lots visible from two streets. We build to those written specs on every install, and we confirm the requirements before fabrication begins.
If your gate is sagging, grinding, or not responding to the remote, call Gate Repair Rialto at (866) 569-6584 for a free estimate. We’ll diagnose the problem, quote a firm price, and fix it right the first time.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within the hour.
- 4You approve before work beginsNothing starts until you say go.
What Rialto Customers Say
"Our slide gate had been dragging for months and getting worse. Turned out the chain was stretched and one of the guide rollers had seized. Both replaced, and he adjusted the limits so it stops properly at both ends now."
- Danielle Ackerman"Fixed the immediate problem. He was honest that the operator is near end of life and I should budget for a replacement, which I appreciate even if it wasn't what I wanted to hear."
- Oscar Flores"We had a hydraulic arm leaking fluid onto the driveway. Replaced, cleaned up the stain as best he could, and it's been dry for months."
- Yolanda Rodriguez